Measuring Range And Bearing To A Target - Furuno FSV-84 Operator's Manual

2. HORIZONTAL MODE
2.5

Measuring Range and Bearing to a Target

Operate the trackball to place the trackball mark on the target you want to
measure the range and bearing. The range, bearing and depth to the target
appear at the upper left corner of the screen.
Trackball position may also be show in latitude and longitude. For further details,
see CURSOR POSITION on page 9-11.
TRACKBALL DATA
Slant range
Horizontal range
Depth
B Relative or
True bearing*
* Four display formats
available. See OTHER
MARKS on page 9-11.
2-14
B
34 ° 56.789N
123 ° 45.678E
Location of trackball data
Trackball mark
Heading line
Own ship mark
Trackball mark
L/L position