Table of Contents
Advertisement
8. CUSTOMIZING THE EQUIPMENT
F6: Erase ship's track
1. Press the [F6] key. The following dialog box appears.
2. Press the [F6] key again. The oldest part of the track will be erased. Each
pressing erases approximately 10% of the track.
8.2.2
Programming function keys
You can change the default setting of a function key as shown below. Note that
all menu items may not be programmed to the function keys. See the menu tree
on page AP-1 to AP-4 for items which can be programmed for function keys.
1. Press the [MENU] key to open the menu.
2. Display the menu item which you want to assign to a function key.
3. Press desired function key for more than one second. The display shows the
following message for five seconds at the top of the screen.
4. Press the same function key again, and the following message appears. This
completes the procedure for programming a function key.
8-6
<<ERASE SHIP TRACK>>
100 %
Dialog box for erase ship track
(FUNCTION KEY REGISTRATION)
REPLACE THE FUNCTION TO NEW
SETTING. PRESS THE KEY AGAIN
TO PROCEED.
Confirmation for registering function key
(FUNCTION KEY REGISTRATION)
REGISTRATION COMPLETED.
Confirmation for registering function key
Advertisement
Table of Contents
Troubleshooting
