Furuno FSV-84 Operator's Manual page 38

2. HORIZONTAL MODE
3. Select DISPLAY SETTING and press the [MENU] key to open the DISPLAY
SETTING menu.
4. Select H2/S DISPLAY and press the [MENU] key.
5. Select the desired combination with the trackball and press the [MENU] key.
6. Select QUIT and press the [MENU] key to finish.
2-4
MENU
OTHERS
DISPLAY SETTING
DISPLAY MODE...
MODE SELECTION : MODE KEY
TX/RX MODE : ALTERNATIVE
H2/S DISPLAY : LANDSCAPE
PRESENTATION MODE : HEAD UP
TM DISPLAY RANGE : 1.6R
BEARING REF : SHIP HEADING
TILT LEVER : TILT
S AUTO OFF CENTER : OFF
H-SLICE WIDTH : 16
H-SLICE PICT ADVC : KP SYNC
NET COURSE MARK : ENTER
MANUAL DEGAUSS : EXECUTE
AUTO DEGAUSS : INT SENSOR
DIMMER : 10
KEY BEEP VOLUME : 5
DISPLAY SETTING menu
QUIT
CANCEL
LANDSCAPE
PORTRAIT
RIGHT INSET
LEFT INSET
Dialog box for setting combination
QUIT
QUIT
QUIT