Selecting An Echo Sounder Mode - Furuno FSV-84 Operator's Manual

5. ECHO SOUNDER MODE
5.3

Selecting an Echo Sounder Mode

An echo sounder mode may be selected with the [MODE] key, however no echo
sounder mode is available in the default setting. To enable selection of an echo
sounder mode with the [MODE] key, follow the procedure below.
Enabling an echo sounder mode
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select DISPLAY SETTING and press the [MENU] key.
4. Select DISPLAY MODE and press the [MENU] key to show the display mode
dialog box.
5-6
MENU
OTHERS
DISPLAY SETTING
DISPLAY MODE...
MODE SELECTION : MODE KEY
TX/RX MODE : ALTERNATIVE
H2/S DISPLAY : LANDSCAPE
PRESENTATION MODE : HEAD UP
TM DISPLAY RANGE : 1.6R
BEARING REF : SHIP HEADING
TILT LEVER : TILT
S AUTO OFF CENTER : OFF
H-SLICE WIDTH : 16
H-SLICE PICT ADVC : KP SYNC
NET COURSE MARK : ENTER
MANUAL DEGAUSS : EXECUTE
AUTO DEGAUSS : INT SENSOR
DIMMER : 10
KEY BEEP VOLUME : 5
DISPLAY SETTING menu
H1
H1&H2
V1
V1&V2
V1&ES1
V1&ES2
HISTORY
ES1
ES2
ES1&ES2
Display mode dialog box
QUIT
QUIT
QUIT