Furuno FSV-84 Operator's Manual page 209

STABILIZATION menu
This menu compensates for pitching and rolling.
STABILIZATION
PITCH ANGLE COR
ROLL ANGLE COR
SENSOR
STABILIZATION: Turns stabilization on/off.
PITCH ANGLE COR: Offsets pitch angle error generated by motion sensor.
ROLL ANGLE COR: Offsets roll angle error generated by motion sensor.
SENSOR: Select type of motion sensor used, standard or GPS gyro.
TEST menu
This menu conducts various tests. For further details, see Chapter 11.
MENU QUIT
OTHERS QUIT
INITIAL SETTING
QUIT
STABILIZATION
QUIT
: ON
: 0.0
: 0.0
: STANDARD
STABILIZATION menu
MENU
OTHERS
INITIAL SETTING
TEST
BOARD TEST... : EXECUTE
PANEL TEST... : EXECUTE
TEST PATTERN... : EXECUTE
RX TEST... : EXECUTE
NOISE TEST... : EXECUTE
TX : OFF
9. OTHERS MENU
QUIT
QUIT
QUIT
QUIT
9-15