Furuno FSV-84 Operator's Manual page 32

1. OPERATIONAL OVERVIEW
3. Select menu item desired with the trackball and press the [MENU] key. (For
example, select NOISE LIMITER.) A dialog box for the corresponding menu
item appears.
H-SCAN SETTING
TX INTERVAL
TX PULSE LENGTH
TX POWER
TVG-NEAR
TVG-MEDIUM
TVG-FAR
NOISE LIMITER
REVERBERATION
SIDE LOBE SUPPRESS : 1
AGC
2ND AGC
NEAR AGC
ECHO AVERAGE
INT REJECT
BOTTOM SUPPRESS
FREQ SHIFT
FREQ/BEARING SET
OTHERS...
4. Select
[MENU] key to change setting.
Note: For items having options the arrows in the dialog box are replaced
5. Use the trackball to select QUIT from the dialog box and press the [MENU]
key to close the menu.
6. Select QUIT at the top of the menu screen and press the [MENU] key to
close all menus.
1-16
MENU QUIT
QUIT
: 9
: 9
: 9
: 0
: 0
: 0
: 2
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 180
H-SCAN SETTING menu
(raise setting) or
with appropriate options. For example the dialog box for selection of
picture advance speed in the echo sounder mode looks as below.
SPEED SYNC
Echo sounder picture advance speed dialog box
How to set numeric data
QUIT
1. Select
CANCEL
2. Press the [MENU] key to
change setting.
3. Select QUIT and press
the [MENU] key to finish.
(lower setting) with the trackball and press the
QUIT
CANCEL
1/1
1/2
1/4
1/8
or as desired.