Table of Contents
Advertisement
4.3
Display Range
The [RANGE] control selects the detection range. The range selected is
momentarily displayed in large characters at the top of the screen. Range is
always displayed at the top right hand corner of the screen.
Below are the default ranges (in meters).
Range Setting
Range
1. If the slant display or slant combination display is active, press the [HSV] key
to choose the slant mode.
Range and gain indications for the slant display are shown in yellow.
2. Operate the [RANGE] control to select desired range.
Note 1:Ranges may be preset as desired on the PRESET, MEMORY CARD
menu. For further details, see H/S-SCAN RANGE on page 9-5.
Note 2: With the target lock feature active, range is automatically changed
according to target position. (INTERLOCK on the TARGET LOCK menu is set to
the option TILT&RANGE.)
SEA SURFACE
BOTTOM
BOTTOM
Range concept
1
2
3
100
200
400
SEA SURFACE
Range indicated
on the screen.
Range indicated
on the screen.
4
5
6
600
800
1000
4. SLANT MODE
4-7
Advertisement
Table of Contents
Troubleshooting
