Table of Contents
Advertisement
4.14.2
Automatic offcenter
The slant mode display in the slant mode combination display (portrait or
landscape) can be automatically off centered when the train is changed while
using auto train or target lock or the user changes the train angle manually. This
is useful to maintain effective range ratio at 1.0.
To activate this feature it is necessary to activate automatic offcenter from the
menu.
* Numeric/graphic
display area
Train angle: Angle in automatic training, set with the ]V1/S] or [V2] key.
R0: Train angle (30°, 45°, 60°) set on menu.
Automatic offcentering is available regardless whether the train angle setting
value is the same or larger than actual train angle.
1. Press the [MENU] key to open the menu.
2. Select OTHERS and press the [MENU] key.
3. Select DISPLAY SETTING and press the [MENU] key.
4. Select S AUTO OFF CENTER and press the [MENU] key.
The S AUTO OFF CENTER is only operative when the slant combination
display is active in vertical or horizontal split.
5. Choose value desired and press the [MENU] key.
6. Select QUIT and press the [MENU] key.
7. Select QUIT from the top of the menu and press the [MENU] key.
Train angle
*
H disp.
S disp.
Case 1: "Train"<RO
*
H disp.
Train angle
S disp.
Own position
Case 1: "Train"<RO
QUIT
CANCEL
OFF
30°
45°
60°
Own position
H disp.
S disp.
Case 2: "Train">RO
H disp.
Train angle
Own position
S disp.
Case 2: "Train">RO
4. SLANT MODE
Train angle
*
PORTRAIT
format
*
LANDSCAPE
format
4-29
Advertisement
Table of Contents
Troubleshooting
