9
After use
Observe the device type
Do not open the housing
Defective devices
109745_en_01
9.1
Device replacement
In the event of a defect, replace the CAPAROC modules.
If you want to replace a CAPAROC module, proceed as follows:
•
Observe the safety notes in
•
If necessary, disconnect the wiring as shown in
•
Replace the CAPAROC module in your application with a new module. See
Section 4.5, "Replacing a
•
If necessary, connect the supply and the I/O devices. See
moving
cables".
To ensure system functionality, the new module must be of the same device type.
9.2
Device defect and repair
Repairs may only be carried out by Phoenix Contact. Do not open the housing. If the hous-
ing is opened, the function of the device can no longer be ensured.
Please contact Phoenix Contact.
9.3
Maintenance
CAPAROC modules are maintenance-free.
Section 4.1, "Safety notes for mounting and
Section 5.3, "Removing
module".
After use
removal".
cables".
Section 5, "Connecting or re-
59 / 66
PHOENIX CONTACT