Performing The Update - Phoenix Contact CAPAROC Series User Manual

CAPAROC system
User interface
Search for devices
56 / 66
PHOENIX CONTACT
The user interface of the PC WORX FIRMWARE UPDATER is divided into four areas.
Figure 8-3 PC WORX FIRMWARE UPDATER, user interface
1 Toolbar
3 Device list
8.3

Performing the update

Use the icon ("Network Scan") to start searching for devices.
The device must have a valid IP address and subnet mask.
• If necessary, enter a valid IP address or subnet mask in the corresponding field.
• Start the scan again.
Figure 8-4 PC WORX FIRMWARE UPDATER, device search
2 Search bar
4 Message window
109745_en_01