Table 7-15 Local Nominal Current Programming Lock; Table 7-16 Channel Outputs - Phoenix Contact CAPAROC Series User Manual

Table 7-15 Local nominal current programming lock
Byte Data Data
offset type
0 Byte 0 = channel 1 lock inactive
1 = channel 1 lock active
2 = no change
1 0 = channel 2 lock inactive
1 = channel 2 lock active
2 = no change
2 0 = channel 3 lock inactive
1 = channel 3 lock active
2 = no change
3 0 = channel 4 lock inactive
1 = channel 4 lock active
2 = no change
Table 7-16 Channel outputs
Byte Data Data
offset type
0 Byte 0 = switch off channel 1
1 = switch on channel 1
2 = no change
1 0 = switch off channel 2
1 = switch on channel 2
2 = no change
2 0 = switch off channel 3
1 = switch on channel 3
2 = no change
4 0 = switch off channel 4
1 = switch on channel 4
2 = no change
109745_en_01
7.2.2.2 Local programming lock (index 0002
This index can be used to read and write the local programming lock. The read or write com-
mand must be issued to the slot that corresponds to the module position in the system. The
subslot is always "1".
7.2.2.3 Channel outputs (index 0003
This index can be used to switch the channels of a module on and off. The read or write
command must be issued to the slot that corresponds to the module position in the system.
The subslot is always "1".
Process, parameter, and diagnostic data
)
hex
Access
r/w
)
hex
Access
r/w
PHOENIX CONTACT
Default setting
0
Default setting
0
49 / 66