Backlighting setting (B.L.)
This function allows adjusting the backlighting
intensity.
You must access the Setting Menu.
Use buttons (1) and (2) to scroll the Setting Menu and
select "B.L.".
Once function is selected, press button (4).
When entering this function, the instrument panel
will display the currently set value flashing, as well as
the "EXIT" item.
Use buttons (1) and (2) to scroll and select the
flashing available settings "AUTO", "HIGH",
"MEDIUM", "LOW" and "EXIT" with flashing frame.
While user is scrolling the available settings, the
instrument panel will change backlighting
accordingly.
To confirm the selected value, press button (4).
The instrument panel will then set backlighting
according to the selected value and will show "EXIT"
with flashing frame.
Press button (4) to quit and go back to previous
display mode.
1
4
2
Fig 59
1
4
2
Fig 60
85