Table of Contents
Advertisement
Gear
The instrument panel receives information about
the gear engaged and displays the corresponding
value.
If a gear is engaged, the displayed value may range
from 1 to 6, while if in neutral N is displayed and the
Neutral warning light turns on (warning light 2, see
"Instrument panel").
Letter "C" and Neutral warning light (warning light 2,
see "Instrument panel") will be shown flashing if the
gear teach-in procedure has not been performed
yet.
A dash "-" is displayed in these cases:
-
dash "-" and Neutral warning flashing light
(warning light 2, see "Instrument panel") if the
instrument panel does not receive the gear
information;
-
dash "-" steady and Neutral warning light
(warning light 2, see "Instrument panel")
flashing in case of fault;
-
dash "-" steady if gear information is not stable.
46
Note
If the display shows the dash steady on and the
Neutral light is off, then the gearbox could be in a
mechanically unstable position. Up/downshift until
the correct gear is indicated.
Fig 18
Advertisement
Table of Contents
