Table of Contents
Advertisement
If some paired devices are already present in the list:
-
2 Smartphones, the phone icon cannot be
selected, hence no other smartphone can be
paired;
-
1 Rider Helmet, the rider helmet icon cannot be
selected, hence no other rider helmet can be
paired;
-
1 Passenger Helmet, the passenger helmet icon
cannot be selected, hence no other passenger
helmet can be paired;
-
1 Navigator, the navigator icon cannot be
selected, hence no other navigator can be
paired.
To pair a Smartphone, the pairing procedure with the
Bluetooth control unit entails the confirmation of a
pop-up appearing on the smartphone.
To connect a navigator, the connection procedure
shall be completed on the navigator, by selecting the
connection with the motorcycle Bluetooth control
unit. In this case, during the pairing procedure, the
Navigator icon will flash in the Bluetooth Setting
Menu. When the Bluetooth control unit is connected
to the device, the icon stops flashing and becomes
steady ON.
Note
If user does not complete the pairing procedure
on the Navigator within 90 seconds, pairing screen
on instrument panel will go out, and display will go
back to BLUETOOTH SETTING MENU main screen.
As soon as the pairing is completed, "WAIT.." is
replaced by the name of the connected device: the
complete name will be scrolled and then only the
first characters will be displayed. Once the device is
paired, the instrument panel will automatically show
the Bluetooth Setting Menu main page.
If no device is found during the pairing phase, the
display will show "NO DEV" and the displayed
number will be ZERO. If no device is connected, no
icon of the device type will be displayed.
Both indications will be available for 3 seconds, after
which buttons (1), (2) will be used to select "EXIT" or
"PAIRING" (if you wish to repeat the search) and
button (4) to confirm.
Pairing deactivation takes place when quitting the
Bluetooth Setting Menu or when no more BT
devices are present.
113
Advertisement
Table of Contents
