Storing The Motorcycle; Important Notes - Ducati Scrambler 1100 Pro 2020 Owner's Manual

Storing the motorcycle

If the motorcycle is to be left unridden over long
periods, it is advisable to carry out the following
operations before storing it away:
- clean the motorcycle;
- empty the fuel tank;
- pour a few drops of engine oil into the cylinders
through the spark plug seats, then crank the
engine by hand a few times so a protective film
of oil will spread on cylinder inner walls;
- place the motorcycle on a service stand;
- disconnect and remove the battery.
Battery should be checked and charged (or replaced,
as required) whenever the motorcycle has been left
unridden for over a month.
Protect the motorcycle with a suitable canvas. This
will protect paintwork and let condensate breathe
out.
The canvas is available from Ducati Performance.

Important notes

Laws in some countries (France, Germany, Great
Britain, Switzerland, etc.) set certain noise and
pollution standards.
Periodically carry out the required checks and
replace parts as necessary using Ducati original
spare parts to be in compliance with regulations in
the given country.
Various electronic components of your vehicle have
data memories that temporarily or permanently
store technical information on the status, events and
faults of the vehicle.
In general, this information documents the status of
a component, module, system or environment.
- Operating status of system components (e.g.
emission control system).
- Status messages of the vehicle and its
components (e.g. wheel rotation speed, engine
rpm, engaged gear, etc.)
- Malfunctions and faults of important system
components (e.g. lights, brakes, etc.)
- Vehicle response in particular riding situations
(e.g. traction control system, etc.)
- Environmental conditions (e.g. temperature,
etc.)
These data are always of a technical nature and are
used to detect and correct faults and optimise
vehicle functions.
221