Installing The Hood Assembly And Bags - Toro Z Master 2000 Series Operator's Manual

6. Align the baffle-mounting tabs with the baffle slots in
the hood, and push the mounting tabs up and through
the slots (Figure 13).
7. Secure the baffle to the hood by inserting the hairpins
into the holes in the baffle-mounting tabs as shown
in Figure 14.
1
2 3
Figure 14
Bagger Hood Assembly
1. Hairpin
2. Bagger hood
3. Baffle-mounting tab
8
Installing the Hood Assembly
and Bags
Parts needed for this procedure:
1 Hood assembly
2 Bag
Procedure
Remove the air-cleaner cover as follows:
1. Open the 2 latches that secure the air-filter cover to the
air-filter housing (Figure
4
g018354
4. Baffle slot
5. Baffle
6. Duct seal
15).
1
5
G018608
Air-Cleaner Cover Removal
1. Air-cleaner cover
2. Breather valve
6
2. Pull the air-filter-cover back and remove the air-filter
cover.
Install the hood assembly as follows:
1. On the hood, locate the keyhole slot in the left and
right-hood brackets
2. On the hopper-support frame, locate the 2 keyed pins
at the pivot brackets on the top of the hopper-support
frame (Figure
14
2 3
Figure 15
3. Air-cleaner latch
(Figure 16).
16).