Toro Z Master 2000 Series Operator's Manual page 24

CAUTION
The bagger adds weight to the rear of the machine
and may cause an unstable condition which could
result in a loss of control.
1. Install the weight-mount bracket under the footrest
with 2 carriage bolts (5/16 x 3/4 inch) and 2 flange
nuts (5/16 inch).
Figure 34
1. Carriage bolt (5/16 x 3/4
inch)
2. Weight-mount bracket
2. Install the front weights on top of the foot rest
35).
3. Secure the front weights on top of the foot rest and to
the weight-mount bracket with 6 bolts (3/8 x 1 inch),
6 lock washers, 6 flat washers, and 3 flange nuts (3/8
inch) (Figure 35).
3. Flange nut (5/16 inch)
(Figure
1. Front weight
2. Flat washer
3. Lock washer
1. Weight-mount bracket
2. Flat washer
24
Figure 35
4. Bolt (3/8 x 1 inch)
5. Hole in footrest
6. Flange nut (3/8 inch)
Figure 36
3. Lock washer
4. Bolt (3/8 x 1 inch)