Compatible Accessories - jbc JNAU Instruction Manual

Changing Cartridge*
Save time and change the cartridge safely without switching the station off. Note: JBC offers a
replacement cartridge Ref. J125010 with outlet diameters of 1mm.
1. Removing
H-A
Place the cartridge in the
extractor and pull the handle
to remove it.
*Important
It is essential to insert the cartridge as far as the mark for a proper connection.
Fuse holder
Use only with a 250V fuse
Use only with a 250V fuse
Employer uniquement avec Employer uniquement avec
un fusible de 250V un fusible de 250V

Compatible Accessories*

Grips for NH High Precision Heater Hose Set
Soft foam grips ensure a better manual control of the tool and greater comfort when working.
Easily replace the grips for NH Heater Hose Set using the slip-on tabs.
1. Inserting Tabs
Insert the slide-on tabs into the
new grip.
6
2. Inserting
Place the handpiece on top of
the new cartridge and press
down slightly.
Fuse holder
Fuse holder
Mark
2. Inserting Handle
Push the grip with the tabs
onto the handle.
3. Fixing
Use the holes to fix the
cartridge.
Fuse holder
(Grip Ref. 0024473)
3. Removing Tabs
Hold the grip and pull them
out. Use a pliers if necessary.
Fuse
Fuse holder Fuse holde
*not included
F