Compatible Accessories - jbc JNA Instruction Manual

Fuse holder
c
Use only with a 250V fuse
Use only with a 250V fuse
Employer uniquement avec Employer uniquement avec
un fusible de 250V un fusible de 250V

Compatible Accessories*

Grips for NH High Precision Heater Hose Set
Soft foam grips ensure a better manual control of the tool and greater comfort when working.
Easily replace the grips for NH Heater Hose Set using the slip-on tabs.
1. Inserting Tabs
Insert the slide-on tabs into the
new grip.
Pick & Place*
This tool helps you place and remove SMDs of any size easily thanks to the suction pump.
Set includes the following needles and cups (2 units of each reference):
- Ref. 0026637: 20G, 60º, Ø0.60 mm/0,0236 in
- Ref. 0026638: 25G, 60º, Ø0.26 mm/0.01023 in - Cup Ref. 0940112, used with needle Ref. 0026637
Fuse holder
Fuse holder
130 mm
100 mm
2. Inserting Handle
80 mm
60 mm
Push the grip with the tabs
50 mm
onto the handle.
40 mm
Pick & Place
Ref. T260-A
200 mm
(Grip Ref. 0024473)
Metallic Needles & Cup Set
- Ref. 0026639: 30G, 60º, Ø0.159 mm/0.00626 in
para manuales - color gris
Fuse holder
130 mm
3. Removing Tabs
Hold the grip and pull them
out. Use a pliers if necessary.
Ref. 0026490
*not included , sold separately
Fuse holder Fuse holde
7