jbc JNAU Instruction Manual page 8

Pedal*
(Ref. P-405)
By means of the pedal connection NH Heater Hose Set (Ref. NH-A) for hot air function and the Pick &
Place Tool (Ref. T260-A) for suction function could be activated and deactivated.
The pedal should be plugged in at the
rear of the station into its connector,
which ist marked with "Pedal", to use
the Pedal functionality.
Pedal and Tool Settings
Start Mode
Select menu . Then by pressing
Select "PEDAL FUNCTION" and confirm with OK button. Then choose between "HOT AIR" and "SUC-
TION". Confirm again with OK button.
Pedal Activation Mode
In both applications, HOT AIR and SUCTION, are 2 different pedal activation modes available.
One Touch Mode
Press the pedal once to activate the function. Press again to stop te function.
Pressed Mode
Start the function by pressing the pedal continuously and stop the function by lifting the pedal. The
function is active as long as the pedal is kept pressed.
Select "PEDAL" confirm with OK button and choose between PRESS ONCE" and "PRESS CONT".
Confirm again with OK button.
8
85-265V 50/60Hz
Power 70W
Main Fuse T2 A
Serial 219801-026
Version 5A
JNAU
Station
select "TOOL" and confirm with
Made in EU
PATENTED
STAND PEDAL
AUX
ROBOT
.
*not included