This manual corresponds to the following references: JNASE-9UA (100V) JNASE-1UA (120V) JNASE-2UA (230V) Packing List The following items are included: Power Cord ..........1 unit JNASE High-Precision Hot Air Control Unit (85V - 265V) ......1 unit Ref. 0024092 (100V) 0023715 (120V) 0023714 (230V) Manual ............1 unit Ref.
para manuales - color gris 200 mm Features and Connections 130 mm 130 mm JNASE High-Precision Hot Air J125 Control Unit Cartridge Range* 100 mm Process Screen 80 mm USB-A Connector Pick and Place 60 mm Activation Switch Main Switch 50 mm High-Precision Heater Hose Set*...
Page 4
JNASE Work Screen JNASE offers an intuitive user interface which provides quick access to station parameters.Default PIN: 0105 Status Bar 17:14 Status Indicator 4m 38s Instant Power Supplied to Hot Air Temp. Air Flow Selec. Heater ºC Current Selected Air flow Temp.
- color gris 200 mm Station Update 130 mm 130 mm Station Update Download the JBC Update File from www.jbctools.com/software.html. Insert the USB flash drive with the 100 mm downloaded file into the station. Update 80 mm System Notifications The following icons will be displayed on the screen’s status bar.
Changing Cartridge* Save time and change the cartridge safely without switching the station off. Note: JBC offers J125 cartridges as replacement. 1. Removing 2. Inserting 3. Fixing Holes Fuse Place the cartridge in the Place the handpiece on top of...
Page 7
para manuales - color gris 200 mm Pick & Place* 130 mm 130 mm This tool helps you place and remove SMDs of any size easily thanks to the suction pump. Pick & Place Metallic Needles & Cup Set Ref. T260-A Ref.
Page 8
Pedal P405* By means of the pedal connection, NH High-Precision Heater Hose Set and the T260 Pick & Place Tool can be activated and deactivated. Made in EU PATENTED 85-265V 50/60Hz Power 70W STAND PEDAL Main Fuse T2 A Serial 219801-026 Version 5A The pedal should be plugged in at the ROBOT...
Page 9
Preheating is a process that minimizes thermal stress and allows the soldering process to take no longer than it should. For most rework processes JBC recommends a preheat temperature between 90 and 130 ºC / 195 and 265 ºF and not exceed a heating rate of 4 ºC/s.
Employer uniquement avec un fusible de 250V un fusible de 250V Fuse holder Fuse holder - Replace any defective or damaged pieces. Use original JBC spare parts only. - Repairs should only be performed by a JBC authorized technical service.
Page 11
para manuales - color gris 200 mm Safety 130 mm 130 mm It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. 100 mm - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cord must be plugged into approved bases.
para manuales - color gris 200 mm Specifications 130 mm 130 mm JNASE High-Prescision Hot Air Control Unit Ref.: JNASE-9UA 100V 50/60Hz. Main fuse: T2A. Rated current 0.85A 100 mm Ref.: JNASE-1UA 120V 50/60Hz. Main fuse: T2A. Rated current 0.85A Ref.: JNASE-2UA 230V 50/60Hz.
Page 16
In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase. This product should not be thrown in the garbage.