Table of Contents
Advertisement
Installation tools
All installation tools are user supplied.
Flat-head screwdriver
ESD wrist strap
Accessories
Mounting bracket
for the F1005 and
F1010
Rubber feet
Console cable
Pre-installation checklist
Table1-4 Checklist before installation
Item
Installation
site
Phillips screwdriver
Marker
Mounting brackets (including M4
shoulder screw) for other F10X0
models than F1005 and F1010
Power cord retainer clip
Requirements
•
•
Ventilation
•
Needle-nose pliers
M4 screw
Power cord
Workbench mounting—Ensure a minimum
clearance of 100 mm (3.94 in) around the air inlet and
outlet vents of the chassis.
19-inch rack mounting—Ensure a minimum
clearance of 80 mm (3.15 in) around the air inlet and
outlet vents of the chassis and a distance of 1U
(44.45 mm, or 1.75 in) between the chassis and other
devices.
A good ventilation system is available at the
installation site.
6
Diagonal pliers
M6 rack screw and cage nut
(shipped with the F1005
and F1010 firewalls and
user supplied for other
models)
Grounding cable
Result
Advertisement
Table of Contents
