Table of Contents
Advertisement
Available languages
Available languages
8980773
Degreasing
Rust Removal
Polishing
Media Type
Plastic Beads
Plastic Beads
Plastic Beads
Walnut Shell
Walnut Shell
Linde A
Red Rouge
Ruby Powder
Alumina Powder
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged
or worn components. Only use identical replacement parts when
servicing.
3.
Keep the tool clean, dry and free from oil/grease at all times.
4.
Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
8
Metal Vibratory Tumbler
Ground corncob, walnut shell or plastic media. Tumble
between 30 to 60 minutes. You can add an abrasive
powder to plastic beads.
Treated plastic media. Tumble for 2 to 6 hours.
Ground corncob or walnut hull. You can include a small
amount of metal polish. Do not add water. Tumble for 30
to 60 minutes.
Abrasive
Fine Silicate
Medium Silicate
Coarse Aluminum
Oxide
Rouge
None added
None added
Rough polish
Medium polish
Finish polish
Application
Light cut-down of metal, surface
prep for polishing
Medium cut-down of metal,
deburring
Heavy cut-down of metal,
deburring
Polishing, oxide removal
Polishing, final polish
Polishing, final polish
Powdered Polishing Additive
Powdered Polishing Additive
Powdered Polishing Additive
For technical questions call 1-800-665-8685
V1.0
Table 1
Advertisement
Table of Contents
