Table of Contents
Advertisement
Available languages
Available languages
V1.0
INTRODUCTION
The metal vibratory tumbler is ideal for removing rust, burrs and surface
imperfections from metal workpieces. It can also polish metals or remove
grease or contaminants with the proper media.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the risk
of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection
and maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-
lit and free of distractions. Place lights so you are not working in a
shadow.
2.
Keep anyone not wearing the appropriate safety equipment away
from the work area.
3.
Store tools properly in a safe and dry location. Keep tools out of the
reach of children.
4.
Do not install or use in the presence of flammable gases, dust or
liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National
Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of work
performed.
2.
Wear gloves that provide protection based on the work materials or
to reduce the effects of tool vibration.
2.1 Do not wear gloves when operating a tool that can snag the
material and pull the hand into the tool.
Visit www.princessauto.com for more information
Metal Vibratory Tumbler
8980773
3
Advertisement
Table of Contents
