Operation; Care And Maintenance - pro.point Solid Deck Cargo Ramp Manual

V1.0

OPERATION

Princess Auto does not recommend the loading or unloading of equipment
on a tailgate. It is recommended that if you choose to load or unload using
a tailgate that you take the proper precautions and support your tailgate
with an approved Tailgate Support.
1. Be sure you are loading on a hard, level and stable surface and
that the vehicle you are loading into is parked with the
emergency/parking brake in 'Park' and the engine is 'off'. Unfold
and place the lip of the ramp against the back of the vehicle.
2. Secure the ramp to the vehicle using the adjustable strap. After the
strap is secure, test the ramp by pulling backwards on it. Make
sure it does not slide back or disengage from the loading surface.
3. Once the ramp is secure and the area is safe to proceed with
loading, move the vehicle to be loaded between the ramps and
center the load between both ramps.
4. Proceed with loading the vehicle, making sure the ramp is
sustaining the load and not bowing from weight.
5. Continue until the vehicle is fully loaded. Secure the brake and tie
down as needed.
6. Unhook the adjustable strap and fold the ramp and lock into the
folded position. Store in a clean, dry and safe place where damage
will not occur.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical replacement
parts when servicing.
3. Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
Visit www.princessauto.com for more information
Solid Deck Cargo Ramp 8822611
5