Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FOS Technologies Roller 7R
Summary of Contents for FOS Technologies Roller 7R
- Page 1 FOS Roller 7R...
-
Page 2: Product Specifications
PRODUCT SPECIFICATIONS TECHNICAL SPECIFICATION Voltage: 110/240 Volt AC, 50/60 Hz. Power Consumption: 230 Watt. Light Source: 7R 230 Watt lamp. Effects: Radial beam effects, with different colors & gobos, variable speed of the barrel and Pan / Tilt barrel movement. Colors: 13 dichroic filters + Open White, with bicolor function and rainbow effect. -
Page 3: Temporary Use
Always connect the product to nominal voltage and frequency. Do not connect the device to dimmers. PROTECTION AGAINST SOLIDS AND WATER Only for IP-rated fixtures The protection level of a housing is set by applied standards. For classification there is used the IP-Code. It contains the declaration „IP“and two following numbers. -
Page 4: Limitations Of Ip Protection
Up / Down buttons you’re moving through the sub menu’s options, with Enter, you are confirming your choice. The FOS Roller 7R offers the following options:... - Page 5 1. DMX Address 2. Lamp Control • • 3. Lamp Power • • 4. No Signal • Auto Program • Sound Mode • Hold Close Shutter • 5. Pan Reverse • • 6. Tilt Reverse • • 7. Mic. Level 8.
-
Page 6: Channel Modes
1. Reset All 2. Reset Scan 3. Reset Other Manual Control: 1. Manual DMX: Auto Program • • Tilt • • Color • Gobo Rot. Barrel • Strobe • • Dimmer 2. Fix Position 3. Internal Program: • Alone Master •... - Page 7 20 – 24 Orange & Cyan • • 25 -29 Cyan • 30 – 34 Cyan & Green 35 – 39 Green • 40 – 44 Green & Light Green • • 45 – 49 Light Green 50 – 54 Light Green & Pink •...
- Page 8 120 – 126 Gobo 1 Shake • • 127 – 133 Gobo 2 Shake • 134 – 140 Gobo 3 Shake 141 – 147 Gobo 4 Shake • 148 – 154 Gobo 5 Shake • • 155 – 161 Gobo 6 Shake 162 –...
-
Page 9: General Information
General Information Replacing a fuse: Always disconnect the fixture from main power before replacing a fuse. Use only the appropriate fuse, with the same type and rating. A fuse with different rating, can damage the fixture in case of failure. Risk of electric shock and / or fire: The fixture must be earthed, supplied always with its nominal voltage and cleaned periodically from dust.
Need help?
Do you have a question about the Roller 7R and is the answer not in the manual?
Questions and answers