Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for FOS Technologies A10-FB4
Summary of Contents for FOS Technologies A10-FB4
- Page 1 LASER SHOW SYSTEM PROFESSIONAL ANIMATION SERIES A10-FB4 MODEL User Guide...
-
Page 2: Safety Notes
Safety Notes Channel NO. Comment Laser ON / OFF Change Page ANIMATION mode Change Pattern LASER SHOW SYSTEM speed of Pattern (0 slowest 255 fastest) SAFETY NOTES Key /Remote: The projector has "Key/Remote Interlock" fuction for Safty. If the function is on, there is Thank you very much for choosing our product, for your safety, please read the no laser emitted. -
Page 3: Dmx Mode
3. Prior to installation and operation of the laser, the paths of the beams and effects should Table 7: FB4 Device Infor be considered, particularly with respect to how they will touch the audience. If direct Function Value Comment audience scanning is desired then the laser energy in the effects needs to be considered to Serial NO. - Page 4 There are no specific “laser laws” or any “laser licences” that anybody needs in order to Master √/x Swap XY own or operate a laser for lightshow use. However, there is specific guidance issued by the Settings Health and Safety Executive in the form of a document called HS(G)95 The Radiation Safety of Lasers Used for Display Purposes.
-
Page 5: General Instructions
General instructions Table 1: Operation Mode Mode Description Unpacking: BEYONG/QS Projector input from BEYONG/QS ILDA Input Thank you for purchasing this product. Please read user guide for safety and operations inf- Projector input from ILDA signals DMX -512 ormation before using the product. Keep this manual for future reference. This product can Operation Projector input from DMX signals create perfect laser programs and effects since it has passed a series of strictly tests before... -
Page 6: Menu Setting
Menu Setting Technical Specification Rotate the Funciton key to select the mode and parameter, the LCD will change. Press the Function key to enter the menu, the LCD will change. 1. Voltage: AC200~250V, 50HZ/60HZ, Fuse 3A/250V 2. Rated Power: 150W Submenu See 3. -
Page 7: Function & Setting
SD card is inserted to the SD card jack, in different mode will run the program in the SD card. Computer will be connected by the Ethernet jack using the a Ethernet cable. For firmware be updated use following sequence of operations: 1.
Need help?
Do you have a question about the A10-FB4 and is the answer not in the manual?
Questions and answers