Table of Contents
Advertisement
12 - ACCESSORIES INSTALLATION
FILTER FRAME (CODE STUDIOCOBTPG - OPTIONAL)
1
Mount the barn door holder using the four screws to the four holes on the front cover of the unit.
2
C
A
B
DETAIL
Push the pin (A) and open upward the gel frame lock (B). Insert the filter frame (C) from above into the
guides (DETAIL) of the previously mounted holder. Then close the gel frame lock.
NOTE: To remove the accessory, reverse the procedure.
Fig. 08
PROLIGHTS - StudioCob PFC2
17
Advertisement
Table of Contents
