Using Watch Operations To Adjust The Time Setting - Casio 5672 Operation Manual

Using Watch Operations to
Adjust the Time Setting
If your watch cannot connect with a phone for
some reason, you can use watch operations
to adjust date and time settings.
Selecting Your Home City's Time Zone
●
Use the procedure in this section to select the
time zone of the city you want to use as your
Home City.
Important!
If you do not specify the time zone
●
where you are using the watch, the
current time setting will not be correct
after it is adjusted based on a time
calibration signal.
1.
Loosen the crown and then pull it out to the
second click.
The second hand indicates the currently
selected time zone, while the mode hand
indicates the current summer time setting.
The time zone is indicated as a time
●
offset. ±0 hours is indicated when the
second hand is at 12 o'clock, with other
offsets indicated when it is to the left and
right of 12 o'clock. For information about
time zone positions, go to the section
below.
City (Time Zone) Table
l
Tokyo (+9 offset)
Time zone (+9 position)
Summer time setting
2.
Rotate the crown to change the time zone.
3.
Push the crown back in and then lock it.
Watch Operation Guide 5672
Adjusting the Time and Day Setting
●
1.
Loosen the crown and then pull it out to the
second click.
The second hand will point to the currently
selected time zone.
The mode hand will point to the summer
●
time setting for the currently selected
Home City.
Summer time setting
2.
Hold down (C) for at least one second.
This causes the second hand to move to
12 o'clock, and enables the hour and
minute setting operation.
3.
Rotate the crown to change the hour and
minute settings.
4.
Press (C).
This enables the year ten's digit setting
operation.
5.
Rotate the crown to move the second
hand to the desired setting for the year
ten's digit.
6.
Crown
Press (C).
This enables the year one's digit setting
operation.
7.
Rotate the crown to move the second
hand to the desired setting for the year
one's digit.
Time zone
Crown
Year (10's digit)
00
10
20
90
30
80 40
70 50
60
Year (one's digit)
0
1
2
9
3
8 4
5
7
6
8.
Press (C).
This enables the month setting operation.
9.
Rotate the crown to change the month.
12
11 1
10
9
8
7 5
6
Month
10.
Press (C).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
Changing the day setting will cause the
●
mode hand to rotate repeatedly.
Hand and Day Indicator Movement
l
11.
Rotate the crown to change the day.
Day
To return to the hour and minute setting
●
operation, press (C).
12.
On a time signal at the top of a minute,
push the crown back in and lock it.
Configuring the Summer Time Setting
●
(Home City)
The watch's current time setting can be
change to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
2
3
4
19