Using Watch Operations To Adjust The Time Setting - Casio 5690 Operation Manual

Using Watch Operations to
Adjust the Time Setting
If your watch cannot connect with a phone for
some reason, you can use watch operations
to adjust date and time settings.
Setting a Home City
●
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
configure a summer time setting.
Note
The initial factory default summer time
●
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3.
Use (B) and (D) to change the Home City
setting.
Holding down (B) or (D) scrolls through
●
settings at high speed.
For details refer to the information
●
below.
City Table
l
4.
Press (C).
Watch Operation Guide 5690
5.
Use (D) to select a summer time setting.
Each press of (D) cycles through available
settings in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
6.
Press (A) to complete the setting
operation.
Setting the Time/Date
●
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
3.
Keep pressing (C) until the setting you
want to change is flashing.
●
Home City
Each press of (C) moves the flashing to
the next setting in the sequence shown
below.
Home City
Summer time
Seconds
Hours
Minutes
Year
Month
Day
12/24-hour timekeeping
Day of the week language
Operation tone enable/disable
Illumination duration
Auto time adjustment
14