Dual Time; Using Casio Watches To Configure World Time City Settings; Selecting A Time Zone; Configuring The Summer Time Setting - Casio 5672 Operation Manual

Dual Time

Dual Time lets you look up the current time in
various time zones around the globe.
Using CASIO WATCHES to
Configure World Time City
Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set the World
Time city.
Configuring World Time Settings
l
Note
World Time cities that can be selected
●
only by using CASIO WATCHES
cannot be selected using watch
operations.
Watch Operation Guide 5672

Selecting a Time Zone

Use the procedure below to specify the time
zone where the city whose time you want to
use for Dual Time is located.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Loosen the crown and then pull it out to the
first click.
The second hand will point to the currently
selected time zone.
The mode hand will point to the summer
●
time setting of the Dual Time.
The time zone is indicated as a time
●
offset. ±0 hours is indicated when the
second hand is at 12 o'clock, with other
offsets indicated when it is to the left and
right of 12 o'clock. For information about
time zone positions, go to the section
below.
City (Time Zone) Table
l
New York (-5 offset)
Summer time setting
3.
Rotate the crown to change the time zone.
The Dual Time hour and minute hands
indicate the current time in the selected
time zone.
4.
Push the crown back in and then lock it.
Time zone (55 position)
Crown
Crown
Dual Time hour and minute
Dual Time 24-hour
Configuring the Summer
Time Setting (Dual Time)
The watch's current time setting can be
change to summer time when required.
[STD]: The watch always indicates standard

time.

[DST]: The watch always indicates summer
time.
Important!
If the Dual Time zone is one area where
●
time calibration signal reception is
possible, you can select [AT] (Auto) for
the summer time setting. While [AT] is
specified as the summer time setting,
the first time calibration signal receive
operation before or after the summer
time period is entered will cause the
Dual Time setting to switch
automatically between summer time
and standard time.
For information about areas where
time calibration signals can be
received, go to the section below.
City (Time Zone) Table
l
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Loosen the crown and then pull it out to the
first click.
The second hand will point to the currently
selected time zone.
The mode hand will point to the summer
●
time setting of the Dual Time.
Time zone
Summer time setting
Crown
21