Table of Contents
Advertisement
Using Watch Operations to
Adjust the Time Setting
If, for some reason, you cannot use time signal
reception to adjust the current time setting,
you can adjust date, time, and Home City
settings manually using watch button
operations.
Setting a Home City
●
Use the procedure in this section to select a
city to use as your Home City. If you are in an
area that observes summer time, you can also
enable or disable summer time.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
3.
Use (A) and (C) to change the Home City
setting.
Holding down (A) or (C) scrolls through
●
settings at high speed.
For details refer to the information
●
below.
City Table
l
4.
Press (D).
Watch Operation Guide 3553
5.
Use (A) to change the summer time
setting.
Each press of (A) cycles through settings
in the sequence shown below.
[AUTO]
●
The watch switches between standard
time and summer time automatically.
[OFF]
●
The watch always indicates standard
time.
[ON]
●
The watch always indicates summer
time.
Home City
6.
Press (E) twice to complete the setting
operation.
Note
The [AUTO] summer time setting is
●
valid when the watch's Home City is in
an area where a time signal can be
received.
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Setting the Time/Date
●
You can use the procedure below to adjust the
time and date settings when using the watch
where signal reception is not possible.
Important!
If you are using the watch in an area
●
where signal receive operations are
possible, time and date settings using
the time signal is recommended.
Configure the Home City setting before
●
changing the current time and date
settings.
Setting a Home City
l
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (E) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
13
Advertisement
Table of Contents
