Setting The Alarm; Configuring Timer Settings; Adjusting Hand And Day Indicator Alignment; Phone Finder - Casio 5672 Operation Manual

Setting the Alarm

1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
Change the alarm setting from off to on.
●
Set the hour and minute of the alarm
●
time.

Configuring Timer Settings

1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
Set the hours and minutes of the timer
●
start time.
Watch Operation Guide 5672
Adjusting Hand and Day
Indicator Alignment
If the hands and/or day indicator are out of
alignment even though auto time adjustment
is being performed, use CASIO WATCHES to
adjust them.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3. Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Phone finder will not sound the tone
●
unless CASIO WATCHES is running
on the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1. X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected Disconnected
2. X
Hold down (D) until the second hand
points to [C] twice.
A connection will be established between
the watch and phone, and then the
phone's ringtone will sound.
It will take a few seconds before the
●
phone tone sounds.
3. X
Press any button to stop the tone.
You can press any watch button to stop
●
the phone tone, but only during the first
30 seconds after it starts to sound.

Configuring Watch Settings

You can use CASIO WATCHES to specify the
amount of time until the Bluetooth connection
is automatically terminated, and to configure
other settings.
1. Y
Tap the "CASIO WATCHES" icon.
2. X
Hold down (C) for at least 2.5 seconds
until the second hand points to [C].
This establishes a connection between
the watch and phone.
3. Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
14