NetBAY3E enclosure
Features
The IBM NetBAY3E enclosure provides a convenient 3-U high by 28-inch deep
storage cabinet for the installation of computer devices.
Note: Vertical measurements are given in rack units (U). One U is equal to 4.45
Up to three NetBAY3E enclosures can be stacked under certain IBM servers.
Devices such as the IBM EXP10, an uninterruptable power supply (UPS), or various
telecommunications equipment can also be installed in a NetBAY3E enclosure.
Important:
Locations
The following sections contain information on specific equipment locations.
Casters
v Two fixed casters 1 at the front of the NetBAY3E enclosure.
v Two swivel casters 2 at the rear of the NetBAY3E enclosure.
© Copyright IBM Corp. 2001
cm (1.75-inches).
v The maximum server weight is 77 kg (170 lb.).
v Refer to the latest IBM Server Hardware Maintenance Manual when
servicing the server.
v Assure all power and signal cables are routed properly and are not
pinched.
v Make sure NetBAY3E enclosures in a stack are securely fastened
together.
v Make sure empty NetBAY3E enclosures (no devices installed) have
the rear cover securely attached.
v Servers are lifted onto and off of the NetBAY3E enclosure. Make
sure you have help when lifting.
79