Line Cords; Power Cables; Netbay Server Dual-Cord Power Distribution Unit Introduction - IBM 9306 Hardware Maintenance Manual

Line cords

The 2.5 m (8.2 ft) fixed line cord on the Rack PDU determines the connectivity of
the Rack PDU. The following table contains a list of the line cords that you can use
with the Rack PDU:

Power cables

The Rack PDU comes with three power cables, that you use to connect to other
M/PDU family devices, as listed in the following table:

NetBAY server dual-cord Power Distribution Unit introduction

The IBM NetBAY Server Dual-cord Power Distribution Unit is part of the Rack
Modular Power Distribution Unit (M/PDU) family and enables you to connect one
server to two dedicated, independent, and redundant power sources, such as an
electrical outlet and an uninterruptable power supply (UPS). The Rack PDU has two
power inlets, for Main and Backup power connections, and four IEC standard power
outlets.
Notes:
1. You will have some unused parts depending upon how you install the Rack
2. When you install two Rack PDUs you will need some parts from both options.
3. You can install other M/PDU family devices next to your Rack PDU using
Power Source
100-127 V ac, 30 A,
single-phase
200-240 V ac, 30 A,
single-phase
200-240 V ac, 32 A,
single-phase
200-240 V ac, 30 A,
three-phase
380-415 V ac, 32 A,
three-phase
Length Cable rating
1 m (3.3 ft) 250 V, 16 A
PDU.
mounting hardware from both devices.
Line cord rating Plug type
127 V, 30 A NEMA L5-30P
250 V, 30 A NEMA L6-30P
250 V, 32 A IEC 309-2P + Gnd
250 V, 30 A NEMA L21-30P
415 V, 32 A IEC 309-3P + N + Gnd
Plug type
IEC 320-C19 to IEC 320-C20
Line cord
part #
24P6846
24P6847
24P6848
24P6844
24P6845
Cable part #
00N7698
Installing Optional Devices
155