1. Netfinity 7600 systems are rack mountable and ship without a keyboard or mouse. In order to be utilised with a NetBAY3 or in a tower configuration, optional 8Ux28D Rack-to-Tower Kit
(P/N 28L4705) must be installed.
2. Netfinity 7000-M10 systems are rack mountable and ship without a keyboard. In order to be utilised with a NetBAY3 or in a tower configuration, optional Rack-to-Tower Conversion Kit
(P/N 01K8005) must be installed.
3. Netfinity 8500R systems are rack mountable and ship without a keyboard. In order to be utilised with a NetBAY3E or in a tower configuration, optional Rack-to-Tower Kit (P/N 28L4705)
must be installed.
4. NetBAY3 and NetBAY3E do not contain a top cover and therefore require a supported server as the top component in a stack
5. NetBAY3E supports the Netfinity 8500R and other devices that are 28 inches deep.
To access IBM information specific to your country via the World Wide Web, use address: http://www.ibm.com/pc
Enclosur
Installation Guidelines:
1) Locate power units with line cords in the bottom enclosure.
2) Install components starting from the bottom; start with the heaviest device.
3) If nothing is installed in the enclosure, attach the rear blank panel for stability.