Changing The Status Flag Attributes - IBM 9306 Hardware Maintenance Manual

Available menu attributes:
Setting
Resolution
Height
Horizontal/Vertical
Background
Highlight
Text
Delay Time
Order

Changing the status flag attributes

The status flag shows the currently connected server and can be set to appear on
the screen whenever the system is operating. You can alter how and where the flag
appears on the screen by changing one or more of the following attributes:
v Appearance on the screen: none, timed, or constant
v Position on the screen
v Color and opaqueness
To change the flag attributes, do the following:
1. Press the Print Screen key.
2. Press theF2 key to display the Advanced Menu screen. Press the Right Arrow
3. Using the Up Arrow (↑) and Down Arrow (↓) keys, move the highlight to Flag
4. Highlight the setting to be changed and use the + and - keys to adjust the
6. Enter
Effect on Menu or Window Appearance
Affects the size of the menu and windows as they appear on the
display. Choose from values of 320, 480, and 640. The lower the
value, the larger the size.
Affects the size of the text in the menu and windows. The larger the
value, the larger the text.
Determines the position of the menu or window on the screen.
Determines the menu or window background color.
Determines the menu or window highlight bar color.
Determines the menu or window text color.
Sets the time in seconds that the OSCAR selection window is
delayed before appearing after the Print Screen key is pressed. This
delay may be increased so that the menu is not a distraction when
performing simple server switching operations at the keyboard.
Determines the order which the servers are listed, numerically by port
or alphabetically by assigned name.
(→) key to move the highlighting to the Setup menu.
and press the Enter key.
Flag Attributes
Enabled Names on
Row 14
Column 1
Color 2
Text 0
Mode Transparent
values. The following table describes each of the available menu attributes:
Installing Optional Devices
187