Western Digital OpenFlex F3 Series Instruction Manual page 62

1. EU EcoDesign Compliance
EcoDesign Disclosures
1.6 Chassis Disassembly
Figure 63: Removing the Fan Module Shroud Mount
j. Repeat the previous steps to remove the remaining shroud mount.
Step 12 : Uninstall the midplane.
a. Remove the 4 T10 screws that attach the midplane to the backplane using the T10 Torx
screwdriver.
Figure 64: Midplane Screws
b. Carefully pull the midplane out of the backplane connector.
59