Western Digital OpenFlex F3 Series Instruction Manual page 58

EcoDesign Disclosures
c. From the inside rear of the chassis, disconnect the fan shroud connector by sliding the
connector up and out of the connector mounts.
d. Cut the zip ties that attach the cables to the fan shroud.
e. Firmly slide (sideways) the fan shroud towards the center of the chassis until the T-standoff
is loosened from the keyhole.
Figure 57: Fan Module Shroud Side Screws
Figure 58: Disconnecting the Fan Shroud
1. EU EcoDesign Compliance
1.6 Chassis Disassembly
55