Western Digital OpenFlex F3 Series Instruction Manual page 45

EcoDesign Disclosures
• Tweezers or needle-nose pliers
(recommended)
Step 1 : Disconnect the power cable from the failed PSU.
Figure 36: Enclosure Power and Data Connections
a. Move to the rear of the rack and open the cable retention clip on the PSU and disconnect
the power cable from the PSU.
Step 2 : Uninstall the PSU from the enclosure.
a. With your left hand, grasp the metal ring handle with your fingers and use your thumb to
press the latch release using a pinching motion.
Required Tools
Figure 37: Cable Retention Clip Operation
1. EU EcoDesign Compliance
1.6 Chassis Disassembly
# of People Required
42