Western Digital OpenFlex F3 Series Instruction Manual page 48

EcoDesign Disclosures
b. Lower the release handle until the BMC module is fully unseated (this occurs at about 60°)
and pull the BMC module out of the chassis ensuring that you support the under side of
the BMC module with your other hand.
Step 6 : Uninstall the OpenFlex F3x00 from the enclosure.
a. From the front of the rack, press the release button on the front of the OpenFlex F3x00 .
The release handle will eject outward.
Figure 42: BMC Module Release Handle Operation
Figure 43: Uninstall BMC Module
1. EU EcoDesign Compliance
1.6 Chassis Disassembly
45