Western Digital OpenFlex F3 Series Instruction Manual page 46

EcoDesign Disclosures
b. Carefully pull the PSU out of the PSU Bay.
Step 3 : Uninstall the remaining PSU.
Step 4 : Uninstall the Fan Module from the enclosure.
a. From the rear of the rack, unlock the Fan Module by turning the thumbscrew
counterclockwise until the screw threads are not engaged any longer. The location of the
thumbscrew is shown in the following image.
Figure 38: PSU Release Latch Operation (Top View)
Figure 39: Uninstall PSU
1. EU EcoDesign Compliance
1.6 Chassis Disassembly
43