Western Digital OpenFlex F3 Series Instruction Manual page 47

EcoDesign Disclosures
b. Pull the release handle out until the Fan Module is unseated and can be removed from the
fan bay.
c. Uninstall each Fan Module in the same way the first was uninstalled.
Step 5 : Uninstall the BMC module from the enclosure.
a. Grasp the release handle with your forefinger on the bottom and thumb on the top of the
release latch and press the release latch with your thumb. The handle will eject from the
front of the BMC module.
Figure 40: Fan Module Release Handle Unlocked
Figure 41: Uninstall Fan Module
1. EU EcoDesign Compliance
1.6 Chassis Disassembly
44