Parking Brake System-Electronic Parking Brake (Epb) - MG ZS EV Owner's Manual

Starting & Driving
Parking Brake System-Electronic
Parking Brake (EPB)
In the event of EPB malfunction
where EPB release is not possible,
please consult an MG Authorised
Repairer in order to carry out an
emergency manual release of the
parking brake.
The EPB can be applied and released in two
ways:
112
• Manual operation: When the vehicle is
parked safely, pull the EPB switch upward
to apply EPB. Ensure the START/STOP
Switch is in ON/READY state, press the
brake pedal, and press the EPB switch to
release EPB.
• Automatic operation: When the vehicle
is parked safely, selecting P on the shift
control knob will automatically apply
EPB. If the vehicle is stably parked on a
flat road or a road with a small ramp, the
START/STOP Switch is in READY state,
press the brake pedal and turn the shift
control knob from P to N, D or R, the
EPB will automatically release.
The indicator in the EPB switch and the
indicator in the instrument pack illuminate,
indicating that the EPB is applied. The indicator
in the EPB switch and the indicator
instrument pack extinguish, indicating that
the EPB is released.
Note: Always apply EPB before leaving
the vehicle.
Note: An audible motor noise may be
heard when applying or releasing EPB.
Note: If the vehicle is on a steep slope,
turning the shift control knob from P to
N, D or R will not automatically release
EPB. In this case, manually release EPB or
apply the Start Assist function of the EPB
to release EPB.
IMPORTANT
• DO NOT leave the vehicle before the
indicator in the EPB switch illuminates
and the gear indicator displays P. The
vehicle may not be safely parked due to
EPB failure, resulting in sliding.
• The EPB cannot be applied or released
in the event of a flat battery or power
failure. If using 'jump leads' to temporarily
supply power please see 'Emergency
Starting' in the Emergency Information.
in the