Table of Contents
Advertisement
PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT
PROJECTION LENS
LENS COVER
BACK
EXHAUST VENTS
HOT AIR EXHAUSTED !
Air blown from Exhaust Vents is hot. When
using or installing projector, the following
precautions should be taken.
Do not put any flammable object near these
vents.
Keep the rear grills at least 3'(1m) away from
any object, especially heat-sensitive object.
Do not touch this area, especially screws and
metallic parts. This area will become hot
while projector is used.
This projector detects internal temperature
and automatically controls operating power
of Cooling Fans.
BOTTOM
AIR INTAKE VENTS
(Side and Bottom)
This projector is equipped with Cooling
Fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
Do not cover vent slots.
Keep bottom clear of any object.
Obstructions may block cooling air.
TOP CONTROLS
AND INDICATORS
SPEAKERS
POWER CORD CONNECTOR
LAMP COVER
INFRARED
REMOTE RECEIVERS
MAIN ON / OFF SWITCH
TERMINALS
AND CONNECTORS
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7
Advertisement
Table of Contents
