Video Mode; Selecting Input Source - Sanyo PLV-60HT Owner's Manual

VIDEO MODE

DIRECT OPERATION
Choose either Input 2 or Input 3 by pressing INPUT button on the Top
Control or on the Remote Control Unit.
If projector cannot reproduce proper video source, select correct input
source through MENU OPERATION (see below).
MENU OPERATION
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2 Press POINT DOWN button to move a red arrow pointer to
either Input 2 or Input 3 that you want to choose and then press
SELECT button. Source Select Menu appear.
3 Move the pointer to the source that you want to select and then
press SELECT button.

SELECTING INPUT SOURCE

INPUT button
Input 1
Input 2
Input 3
INPUT MENU
Move the arrow to the Input
source and press SELECT
button.
INPUT 2
Source Select Menu (Input 2 / 3)
Move the arrow to the source and press SELECT
button.
INPUT 3
31