Adjustable Feet; Moving Projector - Sanyo PLV-60HT Owner's Manual

Sanyo owner's manual multimedia projector plv-60ht
Hide thumbs Also See for PLV-60HT:
Table of Contents

Advertisement

PREPARATION
Picture tilt and projection angle can be adjusted by
rotating Adjustable Feet. Projection angle can be
adjusted to 9.0 degrees.
1
Lift the front of projector and pull Feet Lock Latches on
both sides of projector.
2
Release Feet Lock Latches to lock Adjustable Feet and
rotate Adjustable Feet to fine tune position and tilt.
3
To shorten Adjustable Feet, lift the front of projector and
pull and undo Feet Lock Latches.
Position and keystone distortion of the image can be
adjusted using Menu Operation. (Refer to P 21 and 36.)
Use Carry Handle when moving projector.
When moving projector, replace Lens Cover and retract
Adjustable Feet to prevent damage to Projection Lens
and cabinet.
When this projector is not in use for an extended period,
put it into the case (Dust Cover) supplied with this
projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
Do not drop or bump projector, otherwise damages or malfunctions may result.
When carrying projector, use a suitable carrying case.
Do not transport projector by using a courier or transport service in an unsuitable transport case. This
may cause damage to projector. To transport projector through a courier or transport service, consult your
dealer for best way.
10

ADJUSTABLE FEET

FEET LOCK
LATCHES

MOVING PROJECTOR

ADJUSTABLE FEET

Advertisement

Table of Contents
loading

Table of Contents