Table of Contents
Advertisement
COMPUTER MODE
This projector automatically selects PC system among those provided
in this projector and PC system can be also selected manually.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SYSTEM icon.
2
Press POINT DOWN button to move a red arrow pointer to the
system that you want to set, and then press SELECT button.
Auto PC Adjustment function is provided to automatically adjust Fine sync., Total dots, and Picture Position to conform to
your computer. Auto PC Adjustment function can be operated as follows.
Auto PC Adj.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to PC
ADJUST Menu icon.
2
Press POINT DOWN button to move a red frame pointer to
AUTO PC Adj. icon and then press SELECT button.
This Auto PC Adjustment can be executed by pressing AUTO
PC ADJ. button on Top Control or on Remote Control Unit.
Fine sync, Total dots and Picture Position of some computers
may not be fully adjusted with Auto PC Adjustment function.
When the image is not provided properly through this function,
manual adjustment is required. (Refer to page 25, 26.)
Store adjustment parameters.
Adjustment parameters from Auto PC Adjustment can be memorized
in this projector. Once parameters are memorized, setting can be
done just by selecting Mode in SYSTEM Menu (above). Refer to step
3 of MANUAL PC ADJUSTMENT section (P26).
NOTE : Auto PC Adjustment function cannot be operated when
"RGB," "HDTV720p," "HDTV1035i" or "HDTV1080i" is
selected on SYSTEM Menu (P23, 24).
24
SELECT COMPUTER SYSTEM MANUALLY
PC ADJUSTMENT
AUTO PC ADJUSTMENT
SYSTEM MENU
SYSTEM Menu icon
Displays system being selected.
The systems on this dialog box
can be selected.
Custom Mode (1~5) set in PC
ADJUST Menu. (P25, 26)
When this mark is displayed as
black, more computer system
modes will be available. Move
the arrow to this mark and then
press SELECT button, and the
other modes will be displayed.
PC ADJUST MENU
Move a red frame pointer to AUTO PC
Adj. icon and press SELECT button.
PC ADJUST
Menu icon
Advertisement
Table of Contents
