Operating On-Screen Menu; How To Operate On-Screen Menu; Flow Of On-Screen Menu Operation - Sanyo PLV-60HT Owner's Manual

BEFORE OPERATION
You can control and adjust this projector through ON-
SCREEN MENU. Refer to the following pages to operate
each adjustment on ON-SCREEN MENU.
1 DISPLAY MENU
Press MENU button to display ON-SCREEN MENU.
2 MOVING POINTER
Move the pointer ( see below) or adjust the value of item by
pressing POINT button(s) on Top Control or on Remote
Control Unit.
Pointer is the icon on ON-SCREEN MENU to select the
item. See the figures on the section "FLOW OF ON-
SCREEN MENU OPERATION" below.
3 SELECT ITEM
Select the item by pressing SELECT button.
Display ON-SCREEN MENU
Press MENU button to display ON-SCREEN MENU
1
(MENU BAR). A red frame is POINTER.
Select item to be adjusted
2 Move POINTER (red frame) to MENU ICON that you
want to select by pressing POINT RIGHT / LEFT
buttons.
Control and adjust through ON-SCREEN MENU
3 Press POINT DOWN button and move POINTER (red
frame or red arrow) to ITEM that you want to adjust, and
then press SELECT button to show Item Data.
4 Adjust ITEM DATA by pressing POINT buttons.
Refer to the following pages for details of respective
adjustments.
18

OPERATING ON-SCREEN MENU

HOW TO OPERATE ON-SCREEN MENU

FLOW OF ON-SCREEN MENU OPERATION

REMOTE CONTROL
LENS SHIFT KEYSTONE
SELECT
MENU NORMAL
TOP CONTROL
MENU INPUT
SELECT
AUTO PC ADJ. NORMAL
MENU BAR
POINTER (red frame)
Press POINT DOWN button to
move POINTER.
ITEM
SELECT
BUTTON
ITEM DATA
Press POINT LEFT/RIGHT
buttons to adjust the value.
POINT BUTTONS
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.
SELECT BUTTON
Used to select the item.
SELECT BUTTON
Used to select the item.
L
POINT BUTTONS
Used to move the
Pointer UP/ DOWN/
RIGHT/ LEFT.
MENU ICON
POINTER
(red frame)