Selecting Video System - Sanyo PLV-60HT Owner's Manual

Sanyo owner's manual multimedia projector plv-60ht

Hide thumbs Also See for PLV-60HT:

Table of Contents

VIDEO MODE

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to

SYSTEM Menu icon.

Press POINT DOWN button to move a red arrow pointer to the

system that you want to select and then press SELECT button.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If projector cannot reproduce proper video image, it is necessary to

select a specific broadcast signal format among PAL, SECAM, NTSC,

NTSC 4.43, PAL-M, and PAL-N.

Auto

Projector automatically detects incoming Video signal, and adjusts

itself to optimize its performance.

If pM3T*S2 56.69 30p, .59*BT9 6 3 -19 6 O -19 6 O apone Cuton18 0 NTS434 0 9 0 / PAL-N49 386.e.

If projector cannot reproduce proper video image, it is necessary to

select a specific component video signal format among 480i, 575i,

480p, 575p, 720p, 1035i and 1080i.

SELECTING VIDEO SYSTEM

AV SYSTEM MENU (VIDEO OR S-VIDEO)

Move the pointer to the

system

and

SELECT button.

AV SYSTEM MENU (COMPONENT VIDEO)

press

Table of Contents